How to Improve The Performance of a Damaged Gasoline Engine

Illustration of Gasoline

There are several ways to repair a gasoline engine that is beginning to show signs of weakness. This improvement is very important so that the engines and components of the car can work optimally, but with a more economical consumption of fuel. It is known that the engine is the main and most important component of the car, so if the vehicle still wants to drive safely and comfortably, its performance must always be maintained. In fact, there are several simple and difficult steps to improve the performance of your car's engine. 

But if you want to know how to improve the performance of a gasoline car engine to make it last for a long time on a limited budget, check out the full explanation. 

How to improve gasoline engine performance

Gasoline cars usually come in two types of vehicles with different systems. This naturally changes the performance of the engine. If the type of car with a gasoline engine is carburetor and injection. The mode of operation of the two is also quite different because the carburettor system works according to Bernoulli's law ie. the movement of the piston due to the difference in motion. Although these types of injection cars have a sensor system controlled by an ECU (Electronic Control Unit). But how to improve the performance of these two types of gasoline cars? Here is an explanation: 

How to improve the performance of a carbureted car engine 

The use of gasoline engine cars with a carburetor system may no longer exist in the latest and modern types. So this machine is often found only in antique and antique cars. However, the system was replaced with a better combustion system. But you don't need to worry because there are still many ways to improve the performance of a carbureted engine, especially in older cars, including: 

• Switch to higher octane fuel. 

• Amplifier added to the car. But unfortunately both options increase fuel consumption. So that the car does not waste fuel, there are several ways to improve the performance of the carburetor engine, including: 

1. Use JS One 

JS One is an electronic stabilizer (voltmeter) that is often used to boost car power. Thanks to the use of JS One, stable engine electricity can directly increase the fuel consumption of cars. 

2. The R project 

R-Project also has the same features as JS One. It definitely helps to increase the electric power of the car as it increases the current of the battery by 5 times. This tool will definitely make the car more fuel efficient. 

3. Tune up the car regularly 

One common problem with carbureted cars is the accumulation of impurities during combustion, which is why there is always residue in the combustion channel. This residue reduces the power of the car. Therefore, the problem of dirt accumulation in the combustion channel can be overcome by periodically adjusting the jet clean tronic so that the components are thoroughly cleaned. So, in general, improving the performance of a gasoline car engine is not difficult. However, every car owner must perform regular maintenance to prevent damage and reduced engine performance. You can improve the engine performance of your petrol car by trying the following steps. 

a. Use good quality fuel. Using good quality fuel with the manufacturer's recommended octane rating can improve engine performance. Quality fuel has better combustion characteristics and can optimize the power output. 

b. Make sure the machine is in good condition. Regular engine maintenance is the key to maintaining its performance. Make sure you change the oil regularly, clean the air filter and keep the cooling system in good condition. Machines in good condition have better performance. 

c. Pay attention to the exhaust system: A clogged or damaged exhaust system can restrict exhaust flow and reduce engine performance. Make sure that the muffler is not blocked and that the muffler is not damaged. If necessary, consider replacing the muffler with a better one to increase exhaust flow. 

d. Pay attention to the air filter system: Make sure the air filter is in good condition and clean. A dirty air filter can restrict air flow to the engine and affect its performance. Regular cleaning or replacement of the air filter can improve engine performance. 

e. Pay attention to the combustion system: an efficient combustion system is the key to optimal engine performance. Make sure the spark plug is in good condition and meets the manufacturer's recommendations. Replace worn or damaged spark plugs to ensure good combustion. 

f. Pay attention to the cooling system: A good cooling system is very important to keep the engine temperature stable. Make sure there is enough coolant and it is in good condition. Clean the radiator regularly to avoid blocking the cooling flow. 

g. Consider an upgrade: If you want to significantly improve the performance of your engine, consider upgrading some parts such as the intake manifold, throttle body or fuel injection system. But before upgrading, make sure you understand the potential consequences and contact a qualified mechanic. In addition to the above steps, it is important to drive sensibly and obey speed limits. Good engine handling and regular proper maintenance will help the engine work for a long time. 

Illustration of Gasoline

How to improve the engine performance of the spray car

In addition to carbureted cars, fuel-injected cars are also known on the market and widely used by the public. However, like any other car, the performance of the engine deteriorates over time, so of course it needs to be updated regularly. Unlike a carbureted car, which can increase power and performance by changing parts to reduce the weight of the car, this type of fuel-injected car has a different treatment to improve its performance. How to increase the performance of the jet truck engine while saving fuel? Here is the full list! 

1. Repair the car ECU  

One way to improve the engine performance of a fuel-injected car is to replace the ECU (Engine Control Unit), which is the replacement or reprogramming of the software that controls the operation of the car's engine. The ECU is a computer that controls various aspects of the performance of the engine, including fuel, ignition, turbo pressure (if needed), and other variables.

In the standard configuration, the manufacturer's ECU is programmed to take into account several aspects such as fuel economy, emissions and reliability. The main purpose of the EKU update is to improve engine performance by optimizing parameters and settings in the EKU software.

During this process, a tuner or EKU specialist modifies and programs the EKU software to meet the car owner's desired performance requirements. ECU reprogramming can offer a number of benefits, including: 

a. Power: ECU remapping can increase engine power by increasing burn time, increasing turbo pressure (if needed), or increasing air and fuel flow. With the right settings, engine performance can be greatly improved.

b. Better response: ECU redesign can improve engine response. This means that the car responds more quickly to a driver, such as smoother acceleration and faster acceleration.

c. Increased Torque: Torque is the power that the engine uses to move the vehicle. Changing the ECU can increase engine torque, which means the car has better grip when accelerating or going uphill.

d. Better fuel economy: In some cases, re-engineering the ECU can optimize combustion and better manage fuel, which can improve engine fuel economy. Although increasing efficiency usually requires more fuel, a proper EKU conversion can help achieve a balance between efficiency and effectiveness. It is important to note that ECU remapping should be done by an experienced and reliable tuner. A good Tuner thoroughly analyzes and understands the characteristics of the engine and vehicle systems and pays attention to the limits and reliability of the machine. They optimize ECU parameters considering safety, performance and efficiency. However, be aware that modifying the ECU may affect the vehicle's warranty and may be illegal in some areas.

Before resetting the ECU, it is important to understand and follow the regulations and legal requirements of your country or region. Always do your research and talk to the experts before replacing your car's ECU. 

2. Using a throttle body spacer 

Another way to improve the performance of the car, especially in the injection system, is to use a throttle body spacer. 

This tool can work by increasing the speed of air entering the combustion chamber. Produces more oxygen and combustion takes place optimally. The results of this combustion improve the performance of the engine and make it more efficient.

3. Use of fast stacks 

The speed sensor is a device installed in the air intake, whose main task is to reduce turbulence, especially on cars equipped with nozzles. Reduced turbulence greatly improves engine performance as long as the crankshaft maintains this speed correctly. There are a number of ways to improve the performance of gasoline cars (both fuel injected and carbureted) that are starting to show signs of weakness. This includes the use of a voltage stabilizer, period bar, EKU rework, speed stacks and throttle spacers. If all these things you can choose according to your needs. You can improve the engine performance of your petrol car by trying the following steps. 

1. Use high quality fuel. Using good quality fuel with the manufacturer's recommended octane rating can improve engine performance. Quality fuel has better combustion characteristics and can optimize the power output. 

2. Make sure the machine is in good condition. Regular engine maintenance is the key to maintaining its performance. Make sure you change the oil regularly, clean the air filter and keep the cooling system in good condition. Engines in good condition have better performance. 

3. Pay attention to the exhaust system: A clogged or damaged exhaust system can restrict exhaust flow and reduce engine performance. Make sure that the muffler is not blocked and that the muffler is not damaged. If necessary, consider replacing the muffler with a better one to increase exhaust flow. 

4. Pay attention to the air filter system: Make sure the air filter is in good condition and clean. A dirty air filter can restrict airflow to the engine and affect its performance. Regular cleaning or replacement of the air filter can improve engine performance. 

5. Pay attention to the combustion system: an efficient combustion system is the key to optimal engine performance. Make sure the spark plug is in good condition and meets the manufacturer's recommendations. Replace worn or damaged spark plugs to ensure good combustion. 

6. Pay attention to the cooling system: A good cooling system is very important to keep the engine temperature stable. Make sure there is enough coolant and it is in good condition. Clean the radiator regularly so that the flow of coolant is not blocked. 

7. Consider an upgrade: If you want to significantly improve your engine's performance, consider upgrading a component such as the intake manifold, throttle body or fuel injection system. But before upgrading, make sure you understand the potential consequences and contact a qualified mechanic. In addition to the above steps, it is important to drive sensibly and obey speed limits. Good engine handling and regular proper maintenance will help the engine work for a long time. Degrading the performance of a gasoline engine is very important for the car to run well.

Illustration of Gasoline

Here are some ways to improve the performance of a damaged gasoline engine: 

1. Routine maintenance: 

Change the oil regularly according to the manufacturer's recommendations. Clean, fresh oil helps to properly lubricate the engine. o Check and replace the air filter regularly. A dirty air filter can restrict the air flow needed by the engine and reduce its performance. o Make sure the fuel system is working properly. Check and clean the fuel injectors regularly to ensure a continuous flow of fuel. 

2. Combustion system: 

Check and replace spark plugs regularly. Worn or damaged spark plugs can reduce combustion efficiency and engine performance. o Check and adjust switch settings. Incorrect ignition timing can cause the engine to run inefficiently. 

3. Cooling system: 

Make sure the cooling system is working properly and there is enough coolant. Overheating can damage the engine and reduce its performance. 

4. Trigger: 

Check and clean the exhaust regularly. A clogged muffler can restrict exhaust flow and reduce engine performance.

5. Fuel: 

Use high quality fuel and follow the manufacturer's recommendations. Bad fuel can cause deposits in the fuel system and reduce engine performance. o Use the recommended fuel additive to clean the fuel system and maintain engine performance. 

6. Check for mechanical damage: 

Inspect the engine for mechanical damage such as vacuum leaks or low boost pressure. If so, repair or replace the damaged part immediately. 

7. General maintenance: 

Keep the machine clean and avoid dust and dirt that can interfere with its operation. o Avoid heavy driving, such as sudden acceleration or braking, which can damage engine parts. In addition to following the steps above, it is also important to take care of your vehicle with regular maintenance. If the engine still shows signs of poor performance after this service, it is recommended that you take the car to an authorized workshop for further inspection and repair.